Filter
Top Products
Connector Locations 4-1
4036-304
4. Connector Locations
The pin assignments shown are voltages and grounds which can be tested in the field.
Use a multimeter grounded to the scanner MFD controller cage when measuring the
voltage for the main scanner board.
Main Scanner Board
ADF Video Circuit J7:
ADF Video Circuit J8:
Flatbed Video Circuit J9:
Pin No. Assignment
1Ground
3Ground
5Ground
Pin No. Assignment
1Ground
2+24V dc
3Ground
4Ground
5Ground
9 +5V dc
12 Ground
13 Ground
14 +24V dc
Pin No. Assignment
14 +24V dc
15 Analog Ground