Filter
Top Products
Chapter 5: Printer Options
100
Printer Options
11 Plug the Tractor 2 Feeder cable into the tractor connector on
the back of the printer.
Make sure the symbol (
▲
) on the Tractor 2 Feeder cable faces
up. Align the symbol (
▲
) on the cable with the (
▼
) symbol on
the back of the printer above the tractor connector.
12 Position the cable clamp flush with the bottom edge of the
printer and against the embossed edge, with the open section
facing upward.
Tractor 2 Feeder Cable
Tractor Connector
Cable clamp
Embossed edge