Chapter 3: Using the Operator Panel
52
Using the Operator Panel
Setting and Using a Macro
You can use up to four macros to store your settings permanently. To set a
macro, follow these steps:
1 Press Menu.
2 Press Item ↓ until Default Macro appears.
3 Press Next
→
and then Item
↓
until Macro x (x = 1 to 4) appears.
4 Press Store to save the setting.
5 Press Prev.
←
and then Item
↓
until Macro x Options appears.
6 Set and store your settings (see “Macro x Options” on page 40 for a
list of items you can set in your macro).
7 Press Quit.
To use a macro:
1 Press Menu.
2 Press Item ↓ until Load Macro appears.
3
Press Next → until Macro x (x = 1 to 4) appears.
4 Press Store to save the setting.
5 Press Quit.