Filter
Top Products
Chapter 4: Selecting and Loading Paper
70
Selecting and Loading Paper
Loading Continuous Forms
The printer offers one paper path for continuous forms.
Note: If you have installed the optional Auto Sheet Feeder or
Tractor 2 Feeder, see “Printer Options” beginning on page
83 for paper loading instructions.
To load continuous forms:
1 Turn the printer On.
2
Make sure the paper path is clear. If a single sheet or envelope
is loaded in the printer, press FormFeed to remove it.
3
Make sure AutoGap is On. (This is the default setting.) For
help, see “AutoGap Set to On” on page 48.
4 Move the paper select lever down to the continuous forms
position.
5
Pull up the bottom front of the printer to open the front cover.