Filter
Top Products
9
4
Attach the operator panel overlay.
If English is not your preferred language,
attach the overlay with the appropriately
translated names for the operator panel.
a Peel the protective backing off the over-
lay.
b Align the holes in the overlay with the
buttons on the operator panel and press
it into place.
c Rub the overlay firmly to make sure it
adheres securely to the operator panel.
d Peel the protective covering away from
the overlay.
5 Attach the paper bail. If you will be installing
a finisher or 5-bin mailbox, skip to step 6.
a Remove the printer top cover and slide
the plastic bracket onto the static brush
holder. Adjust the bracket so it is cen-
tered over the area where paper exits.
b Place the tips of the wire paper bail into
the ends of the plastic bracket so that the
bail curves downward.
c Replace the top cover.
6 Attach output options. See:
• “Installing a finisher” on page 10
• “Installing an output expander” on page 11
• “Installing a 5-bin mailbox” on page 13
• “Installing a high-capacity output stacker” on
page 15
Operator panel
overlay