Filter
Top Products
10
Installing a finisher The finisher is shipped with a staple cartridge
already installed.
After you carefully unpack the finisher, install it
immediately; otherwise, the edges of the mounting
brackets could damage tabletops or fabrics.
Warning! The finisher tray is designed to hold the weight of
print material only. Do not use it as a shelf; excess
weight may damage it.
1 Remove the top cover or any previously
installed output options from the printer.
Note: The finisher must be positioned directly
above the printer and below other output
options. It cannot be used with the high-
capacity output option.
2 Insert the mounting brackets into the slots
on top of the printer. Make sure the finisher
is seated securely.
Lexmark T Family label
(colored triangle)
Mounting bracket
Mounting slot