Filter
Top Products
5
Installing a 250-sheet or
500-sheet drawer
Paper drawers attach under the printer and
optional duplex unit. The printer automatically rec-
ognizes any drawer that has been installed.
A drawer consists of a paper tray and a support
unit. The 250-sheet drawer and the 500-sheet
drawer are installed the same way.
1 Remove the tray from the support unit.
Remove all packing material and tape from
both the support unit and the tray.
2 Place the support unit on top of any
previously installed paper drawers, or the
table or printer cabinet where you plan to
use the printer.
The tab, round peg, and square holes on top
of any drawer help you seat the support unit
so the edges are aligned properly. Make
sure the support unit is securely in place.
3 Attach another optional drawer, a duplex
unit, or the printer:
• To attach a drawer, repeat steps 1 and 2.
• To attach a duplex unit, see “Installing a
duplex unit” on page 6.
• To attach the printer, see “Setting up the
printer” on page 7.
Lexmark T Family label
(colored triangle)
Tray labels
Paper tray
Support unit
Tab
Round peg
Square hole