Filter
Top Products
13
Installing a 5-bin mailbox The 5-bin mailbox is shipped with a sheet of labels
and a plastic bracket for attaching a paper bail.
After you carefully unpack the mailbox, install it
immediately; otherwise, the edges of the mounting
brackets could damage tabletops or fabrics.
Warning! The 5-bin mailbox is designed to hold the weight of
print material only. Do not use it as a shelf; excess
weight may damage it.
1 Remove the top cover from the printer, fin-
isher, output expander, or previously
installed mailbox.
Note: If you have purchased a finisher or a high-
capacity output stacker, that output option
must be installed directly on the printer,
before the mailbox.
2 Slide the plastic bracket onto the static
brush holder, located on the bottom of the 5-
bin mailbox.
Note: If the mailbox will be the topmost output
option, remove the paper bail from the
bracket on the top cover and store in a
safe place.
Lexmark T Family
label
Labels
Bracket
Mailbox