Filter
Top Products
16
Installing the envelope feeder The envelope feeder attaches to the front of your
printer behind the lower front door. It can be
removed when you are not using it, making the
printer more compact.
Refer to the Lexmark T620/T622 Publications CD
for details about using the envelope feeder.
1 Push the release latch and open the printer
lower front door.
2 Lift open the envelope feeder connector
door.
3 Align the tabs on the envelope feeder with
the slots on both sides of the printer, and
then gently push the envelope feeder into
the opening until it snaps into place.
The envelope feeder tilts downward at a
slight angle when it is installed properly.
Lexmark T Family
label
Envelope feeder
connector door
Release latch
Slots