Filter
Top Products
1
Getting started
1 Select a well-ventilated place to set up your printer.
Allow at least as much space as shown in the illus-
tration. Make sure you have a sturdy, low table or
the optional printer stand on which to set the printer.
2 Remove all items from the box except the printer. If
any items are missing, contact the place where you
bought the printer.
Save the carton and packing material in case you
need to repack the printer for service or storage.
Note: Leave the printer in the box until you are ready to
install it. Then ask someone to help you lift the
printer using the handholds.
Turn off the printer If your printer is already set up, make sure the printer
power is off and the power cord and any cables are
unplugged before installing any options.
Options compatibility Options compatible with Lexmark T Family printers are
labeled with a colored triangle. Label locations are indi-
cated in the illustrations in this book.
Troubleshooting If you encounter a problem while setting up the printer,
refer to the Lexmark T620/T622 Publications CD.
137.16 cm
(4.5 ft)
304.8 mm
(12 in.)
508 mm
(20 in.)
304.8 mm
(12 in.)
304.8 mm
(12 in.)
CDs
Printer
500 sheet drawer - Lexmark T
Family T622 model only
Paper bail
and bracket
Tray number decals - Lexmark
T Family T622 model only
Power
switch
cover
Handhold
Operator panel
overlay
(non-English only)
Power cord