Filter
Top Products
Appendix
Configuring applications using the Embedded Web Server
The application can be manually configured using the Embedded Web Server of a device. However, the setup procedure
has to be completed for each device running the application. Setting up the application using the Embedded Web Server
is recommended for networks where a relatively small number of devices will be used.
Accessing application configuration settings using the Embedded Web Server
1 Obtain the scanner IP address:
• From the scanner home screen
• From the TCP/IP section in the Network/Ports menu
• By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
2 Open a Web browser, and then type the scanner IP address in the address field.
The Embedded Web Server appears.
3 From the navigation menu on the left, click Settings > Apps > Apps Management.
4 From the list of installed applications, click the application you want to configure, and then click Configure.
Customizing the display icon
1 Access the application configuration settings from the Embedded Web Server.
2 From the Configure page, add or edit a profile, and then change the settings if necessary:
• Button Text or Text—Type up to 20 characters that will appear above the profile button on the scanner home
screen. This field is optional.
• Button Icon or Icon—Browse to a new image file that represents the profile on the scanner home screen. This
field is optional.
• Button Icon when pressed or Icon when pressed—Browse to a new image file that will appear while the profile
icon is being pressed. This field is optional.
3 Save or discard your changes.
Appendix 18