Filter
Top Products
Exporting and importing configuration files
Note: When you export a configuration file for this application, any bar code templates created with Bar Code
Discovery will be included in the file. This applies to bar code templates associated with a destination.
Exporting and importing a configuration using the Embedded Web Server
You can export configuration settings into a text file, and then import it to apply the settings to other devices.
1 From the Embedded Web Server, click Settings > Apps > Apps Management.
2 From the list of installed applications, click the name of the application you want to configure.
3 Click Configure, and then do one of the following:
• To export a configuration to a file, click Export, and then follow the instructions on the computer screen to save
the configuration file.
Notes:
– If a JVM Out of Memory error occurs, then repeat the export process until the configuration file is
saved.
– When you export a configuration file, the password specified in the Authentication Options section will
be excluded.
• To import a configuration from a file, click Import, and then browse to the saved configuration file that was
exported from a previously configured device.
Notes:
– Before importing the configuration file, you can choose to preview it first.
– When you import a configuration file with a static user name and password authentication, you must
first reconfigure the password to be able to use the authentication credentials for the destination. For
more information, see authentication-options-topic.
– If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.
Checking which version of the Embedded Solutions Framework
is installed on a scanner
1 Obtain the scanner IP address:
• From the scanner home screen
• From the TCP/IP section in the Network/Ports menu
• By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
2 Open a Web browser, and then type the scanner IP address in the address field.
3 From the Embedded Web Server, click Reports > Device Settings.
4 Scroll down until you see “Embedded Solutions” (usually found near the bottom).
5 In the Embedded Solutions section, note the value next to “Framework =”. This signifies the installed version.
Appendix 19