Filter
Top Products
Configuring Scan to Network
Configuring a destination
1 From the Embedded Web Server, click Settings > Apps > Apps Management.
2 From the list of installed applications, click the name of the application.
3 Under Scan Destination, click Add.
Note: You can also edit or delete existing destinations.
4 Type a name for the destination and other appropriate information.
5 Select Network Folder or FTP Address, and then configure the selected destination.
6 Under Authentication Options, select whether to require user authentication for this destination.
Note: The credentials are used to access the network destination.
7 In the sections that follow, adjust the settings, if necessary:
• Select check boxes to allow users to modify settings.
• Use radio buttons and drop‑down menus to specify the default settings.
• For more information, see “Configuring destination settings” on page 4.
8 Click OK > Apply.
Using the “Set up Scan to Network” feature
1 From the Embedded Web Server, click Set up Scan to Network.
2 Under Scan Destination, click Add.
Note: You can also edit or delete existing destinations.
3 Type the appropriate information to successfully create a destination.
4 Under Authentication Options, select whether to require user authentication for this destination.
Note: The credentials are used to access the network destination.
5 Click OK.
Configuring destination settings
Name
Type a name for the destination.
Location
Select Network Folder or FTP, and then configure the selected destination.
Configuring Scan to Network 4