Lexmark MX711DE Printer User Manual


 
Print Settings
Setup menu
Use To
Printer Language
PCL Emulation
PS Emulation
Set the default printer language.
Notes:
PS Emulation is the factory default printer language.
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Job Waiting
On
Off
Specify that print jobs be removed from the print queue if they
require unavailable printer options or custom settings. They are
stored in a separate print queue, so other jobs print normally. When
the missing information or options are obtained, the stored jobs
print.
Notes:
Off is the factory default setting.
This menu appears only when a printer hard disk is installed.
This requirement ensures that stored jobs are not deleted if
the printer loses power.
Print Area
Normal
Fit to Page
Whole Page
Set the logical and physical printable area.
Notes:
Normal is the factory default setting. When attempting to
print data in the nonprintable area defined by the Normal
setting, the printer clips the image at the boundary.
Whole Page allows the image to be moved into the
nonprintable area defined by the Normal setting. Whole
Page only affects pages printed using a PCL 5e interpreter.
This has no effect on pages printed using the PCL XL or
PostScript interpreter.
Download Target
RAM
Flash
Disk
Set the storage location for downloads.
Notes:
RAM is the factory default setting. Storing downloads in the
RAM is temporary.
Storing downloads in the flash memory or in a printer hard
disk places them in permanent storage. Downloads remain in
the flash memory or in the printer hard disk even when the
printer is turned off.
This menu appears only when a formatted, working flash
drive or printer hard disk is installed.
Understanding the printer menus 218