Lexmark X644E All in One Printer User Manual


 
Settings
43
Using MFP menus
Allow Custom Job
scans
Controls the show and hide
function for the Custom Job
setting and the Custom Job
scanning settings for each
function. The Custom Job
scanning settings set the
default values for Custom Job
for each function. They are
not shown if custom jobs are
not allowed.
This function is also known as
Job Build.
Custom Job is not supported
on all models.
Ye s *
No
This menu item controls hide or show for the
user interface Custom Job setting as well as
the Custom Job scanning settings for each
function. The Custom Job scanning settings
set the default values for Custom Job for each
function.
Scanner jam
recovery
Determines if the MFP
recovers an entire print job or
just the page of the print job
when a scanner jam occurs.
Job level* Custom jobs may not recover at the job level.
Page level Custom jobs always recover at the page level.
Web Page Refresh
Rate
30–300
(120*)
Range is in seconds.
Contact Name text field
NULL*
Location text field
NULL*
LAA Allows the system support
person to change the network
interface hardware address,
so it is a locally administered
address (LAA).
text field
(000000000000*)
Valid entries for the text field must be
numerals only.
Alarms
Controls whether the MFP sounds an alarm when
the device requires operator intervention.
Alarm Control
Off
Single*
Continuous
Alarm Control sets the function of each alarm.
Off–MFP does not sound an alarm.
Single–MFP sounds three quick beeps.
Continuous–MFP repeats three beeps
every 10 seconds.
Toner Alarm activates when the print cartridge
or a toner cartridge is low on toner.
Toner Alarm
Off*
Single
Continuous
Menu item Purpose Values and descriptions