Filter
Top Products
Status messages
94
Understanding MFP messages
Tray [x] Empty x represents the number of the tray.
The tray has no print media installed.
1 Remove the tray. The message clears.
2 Install print media in the tray according to the User’s
Guide.
3 Insert the tray.
Tray [x] Low x specifies the number of the tray
that is low.
Load print media into the specified tray to clear the
message.
Tray [x] Missing x represents the number of the tray
missing from the MFP.
The message is on the Menu
Settings Page also.
Insert the tray to clear the message.
Waiting The MFP receives a page of data to
print but waits for an End of Job
command, a Form Feed command,
or additional data.
Press Stop. Touch Continue to print the contents of
the buffer.
Cancel the current job.
Wait for the message to clear.
Message Meaning Action