Lexmark X644E All in One Printer User Manual


 
Settings
46
Using MFP menus
Print Area Modifies the logical and
physical printable area.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
Normal*
Whole Page
Note: The Whole Page setting only affects
pages printed using PCL 5 interpreter. This
setting has no effect on pages printed using
the PCL XL or PostScript interpreters. If
attempting to print any data in the non-
printable area defined by Normal Print Area,
the MFP clips the image at the boundary
defined by the Normal defined printable area.
Download Target Specifies the storage location
for downloaded resources.
Storing downloaded
resources in flash memory or
on a hard disk is permanent
storage rather than the
temporary storage that RAM
provides. The resources
remain in the flash memory or
on the hard disk even when
the MFP is turned off.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
RAM* All downloaded resources are automatically
stored in printer memory (RAM).
Flash All downloaded resources are automatically
stored in flash memory.
Note: Flash appears as a menu item if a
formatted, nondefective optional flash
memory card which is not Write or Read/Write
password protected is installed.
Disk All downloaded resources are automatically
stored on the hard disk.
Note: Disk appears as a menu item if a
formatted, nondefective hard disk which is not
Write or Read/Write password protected is
installed.
Job Accounting Specifies to store or not store
statistical information about
the most recent print jobs on
the hard disk. The statistics
include whether the job
printed with or without errors,
the print time, the job size (in
bytes), the requested print
media size and type, the total
number of printed pages, and
the number of copies
requested.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
Off* MFP does not store job statistics on the hard
disk.
On MFP stores job statistics for the most recent
print jobs.
Resource Save Specifies what the MFP does
with downloaded resources,
such as fonts and macros
stored in RAM, if the MFP
receives a job that requires
more memory than is
available.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
Off* MFP retains downloaded resources only until
memory is needed. It then deletes those
resources associated with the inactive printer
language.
On MFP retains all downloaded resources for all
printer languages during language changes
and MFP resets. If the MFP runs out of
memory, 38 Memory Full appears.
Banner Page Specifies if the print job
should be printed as a
Banner Page.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
Off*
On
To set to Off, clear the check box.
To set to On, select the check box.
Menu item Purpose Values and descriptions