Filter
Top Products
Specify cartridge settings in the printer software
47
Specify cartridge settings in the printer software
Before you specify the print cartridge settings in the printer software, install the cartridges. For help,
see “Install the cartridges” on page 45.
1 From the Apple menu, choose Control Panels Z600 Series Control Panel.
2 From the Cartridges tab, click Install/Change Cartridge.
The Cartridge Setup dialog box appears. Follow the instruction on the screen to install the
cartridges.
3 Click Continue.
The Cartridge Verification dialog box appears.
4 Select the part numbers of the cartridges you are installing.
5 Select Yes, it is old if the cartridge has been used before, or No, it is new if the cartridge has
not been used before.
Note: If an old cartridge is incorrectly identified as new cartridge, ink levels in the Control
Panel may be incorrect.
6 Click OK.
Aligning the print cartridges
Typically, you only align print cartridges after installing or replacing a cartridge. However, you may
also need to align cartridges when:
• Characters are improperly formed or are misaligned at the left margin.
• Vertical, straight lines are wavy.
To align the cartridges:
1 Load paper.
2 From the Apple menu, choose Control Panels Z600 Series Control Panel.
3 From the Cartridges tab, click Align Cartridges.
The Cartridge Alignment dialog box appears.
4 Click Continue to print the alignment page.
The alignment page prints.
5 Find the number under the darkest arrow for each alignment group on the printed alignment
page.