Filter
Top Products
General troubleshooting
55
5
General troubleshooting
Solving network printing problems, if the printer is connected to
a network adapter
For help, first see “Solving printer software installation problems” on page 52.
If one or more of the following conditions applies to your network printer, continue with “Entering an
IP address” in the next section.
• Your printer is listed as unconfigured in the Network Printer Configuration dialog box or in the
Printer Selection dialog box.
• Your printer is on a remote subnet.
If none of these conditions apply, continue with “Troubleshooting your network printer” on page 56.
Entering an IP address
To enter an IP address and set up your network printer:
1 Open the Z600 Series Control Panel.
2 From the Advanced menu, choose Network Printer Configuration.
For information about: See page:
Solving network printing problems, if the printer is connected to a network adapter 55
Understanding error messages and flashing lights 56
Resolving unsuccessful or slow printing 57
Recovering when your computer stops responding 59
Clearing paper misfeeds or jams 60
Solving print quality problems 61
Solving specialty media problems 64