Filter
Top Products
3.3 IP ACCESS SWITCH LITE Setup Tool
3.3.1 MAC Address Detection
Connect the IP ACCESS SWITCH LITE to your computer either via a local network, or via USB.
If you use a USB connection Windows will detect the IP ACCESS SWITCH LITE as a
‘Removable Disk’ and an appropriate drive letter will be assigned.
Start the setup tool from the CD ROM.
A window opens as shown below:
On the upper left corner, the MAC address of the IP ACCESS SWITCH LITE is displayed. To
detect the MAC address, press the Refresh Devices button. The displayed MAC address is the
same as that printed on the sticker on the base of the unit.
On the lower right corner of the window, there are two buttons: Query Device and Setup
Device. Press the Query Device button to display the preconfigured values of the network
configuration. The values are displayed in the text fields located above. If necessary, adjust the
network settings to your needs. To save the changes enter a user login and a password (see
3.3.2 Authentication, on page 9) and then press the Setup Device button.
8