Filter
Top Products
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option may be left empty;
however, the IP ACCESS SWITCH LITE will not be able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be used in case the
Primary DNS Server cannot be contacted.
Remote Console and HTTPS port
Port number at which the IP ACCESS SWITCH LITE’s Remote Console server and HTTPS
server are listening. If left empty the default value will be used.
HTTP port
Port number at which the IP ACCESS SWITCH LITE’s HTTP server is listening. If left empty the
default value will be used.
Telnet port
Port number at which the IP ACCESS SWITCH LITE’s Telnet server is listening. If left empty the
default value will be used.
Bandwidth limitation
The maximum network traffic generated through the IP ACCESS SWITCH LITE’s ethernet
device. Value in Kbit/s.
Enable Telnet access
Set this option to allow access to ARA express using the Telnet Gateway (see the Section
called Telnet Console on page 23).
Disable Setup Protocol
Enable this option to exclude the IP ACCESS SWITCH LITE from the setup protocol.
41