Filter
Top Products
Modem Init String
The initialization string used by the IP ACCESS SWITCH LITE to initialize the modem. The
default value will work with all modern standard modems directly connected to a telephone
line. In case you have a special modem or the modem is connected to a local telephone
switch that requires a special dial sequence in order to establish a connection to the public
telephone network, you can change this setting by entering a new string. Refer to your
modem’s manual about the AT command syntax.
Modem server IP address
This IP address will be assigned to the IP ACCESS SWITCH LITE during the PPP
handshake. Since it is a point-to-point IP connection virtually every IP address is possible
but you must make sure, it is not interfering with the IP settings of the IP ACCESS SWITCH
LITE and your console computer. The default value will work in most cases.
Modem client IP address
This IP address will be assigned to your console computer during the PPP handshake.
Since it is a point-to-point IP connection virtually every IP address is possible but you must
make sure, it is not interfering with the IP settings of the IP ACCESS SWITCH LITE switch
and your console computer. The default value will work in most cases.
Passthrough access to serial port via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port and access it
(assuming it provides terminal support) via Telnet. Select the appropriate options for the serial
port and use the Telnet Console, or a standard Telnet client to connect to the IP ACCESS
SWITCH LITE.
49