Filter
Top Products
5
Chapter 2: Getting to Know the USB PrintServer
The Front Panel
PrintServer for USB with 4-Port Switch
The Front Panel
The PrintServer's LEDs, where information about network activity is displayed, are located on the front panel.
Status Green. The Status LED will remain continuously lit when a printer is correctly connected to the
PrintServer. The LED will flicker when print jobs are being transmitted to the printer over the
network.
USB Green/Orange. The USB LED lights up green when there is a printer connected. The USB LED
lights up orange when there is an error.
1, 2, 3, 4 Green. These numbered LEDs, corresponding with the numbered ports on the PrintServer’s
back panel, serve two purposes. If the LED is continuously illuminated, the PrintServer is
successfully connected to a device through the LAN port. If the LED is flickering, the
PrintServer is actively sending or receiving data to the wired network.
The Side Panel
Power The Power port is where you will connect the power adapter.
Figure 2-2: The USB PrintServer’s Front Panel
Figure 2-3: The USB PrintServer’s Side Panel