Linksys PSUS4 Switch User Manual


 
2
Chapter 1: Introduction
What’s in this Guide?
PrintServer for USB with 4-Port Switch
Chapter 4: Installing the PrintServer using the Setup Wizard
This chapter instructs you on how to use the Setup Wizard to install your PrintServer.
Chapter 5: Windows Driver Installation
This chapter explains how to install the Windows driver for the PrintServer.
Chapter 6: Configuring the PrintServer
This chapter explains how to configure the PrintServer using the web-based utility.
Chapter 7: Internet Printing Protocol
This chapter instruct you on how to use the PrintServer as an IPP server so you can remotely print.
Chapter 8: Bi-Admin Management
This chapter explains how to configure the PrintServer using the Bi-Admin Management utility.
Appendix A: Troubleshooting
This appendix describes some problems and solutions, as well as frequently asked questions, regarding
installation and use of the PrintServer.
Appendix B: About Bi-Directional Printing
This appendix describes bi-directional printing.
Appendix C: Upgrading Firmware
This appendix instructs you on how to upgrade the firmware on your PrintServer if you should need to do so.
Appendix D: Windows Help
This appendix describes how you can use Windows Help for instructions about networking, such as installing
the TCP/IP protocol.
Appendix E: Finding the MAC Address and IP Address for your Ethernet Adapter.
This appendix describes how to find the MAC address for your computer’s Ethenet adapter so you can use the
MAC filtering and/or MAC address cloning feature of the PrintServer.
Appendix F: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
Appendix G: Specifications
This appendix provides the technical specifications for the PrintServer.
Appendix H: Warranty Information
This appendix supplies the warranty information for the PrintServer..