Filter
Top Products
32
PrintServer for USB with 4-Port Switch
Chapter 8: Bi-Admin Management
The Bi-Admin Management Utility
• Configuration. You may configure the PrintServer with this option. If you click this option, a Verify Password
screen will appear, as shown in Figure 8-14. Make sure that you enter the password in the field before you
click OK or an Incorrect Password message will appear. If the message appears, click OK, enter the correct
password in the field, and click OK again.
After the password is successfully entered, the Configuration screen will appear, as shown in Figure 8-15.
The Configuration screen displays six tabs: System, TCP/IP, Apple Talk, NETBEUI, Internet Printing, and Port.
The tabs will be described below.
System
Enter the Device Name in the field. Enter any comments in the Comment field. To change the password,
select Change Device Password, enter the new password in the Password field, then re-enter the password in
the Confirm Password field. Select the protocol you want to use for your network: TCP/IP, Apple Talk,
NetBEUI, IPX/SPX.
Click the Get Defaults button if you want to return the settings to the default settings.
When finished making your changes on this tab, click the OK button to save these changes, or click the
Cancel button to undo your changes. For more information, click the Help button.
Figure 8-14: Verify Password
Figure 8-15: Configuration - System