Filter
Top Products
Chapter 4
Configuration Using the Web-based Utility
20
Business Series Smart Gigabit Ethernet Switch
Statistics
The Statistics tab contains the Interface Statistics screen,
which lets you display statistics for a specified interface.
Statistics > Interface Statistics
Statistics > Interface Statistics
This screen allows you to display statistics for the Ethernet
port or LAG that you specify. You can also specify the rate
at which the display will be refreshed.
Interface To display statistics for an Ethernet port, select
Port, then select the desired port from the drop-down
menu. To display statistics for a LAG, select LAG and then
select the desired LAG from the drop-down menu.
Refresh Rate Select the rate at which to refresh the
statistics display. The values are 15 sec, 30 sec, 60 sec, and
No Refresh (default).
Interface
This section displays statistics for the packets transmitted
and received on the selected interface.
Receive Statistics Statistics on received packets
Total Bytes (Octets) Displays the number of octets
received on the selected interface.
Unicast Packets Displays the number of Unicast
packets received on the selected interface.
Multicast Packets Displays the number of Multicast
packets received on the selected interface.
Broadcast Packets Displays the number of Broadcast
packets received on the selected interface.
Packets with Errors Displays the number of error
packets received from the selected interface.
Transmit Statistics Statistics on transmitted packets
Total Bytes (Octets) Displays the number of octets
transmitted from the selected interface.
•
•
•
•
•
•
Unicast Packets Displays the number of Unicast
packets transmitted from the selected interface.
Multicast Packets Displays the number of Multicast
packets transmitted from the selected interface.
Broadcast Packets Displays the number of Broadcast
packets transmitted from the selected interface.
Ethernet-like
This section displays the following statistics for the
selected interface.
Frame Check Sequence (FCS) Errors Displays the
number of FCS errors received on the selected interface.
Single Collision Frames Displays the number of single
collision frames received on the selected interface.
Late Collisions Displays the number of late collision
frames received on the selected interface.
Oversize Packets Displays the number of oversize packet
errors on the selected interface.
Internal MAC Receive Errors Displays the number of
internal MAC received errors on the selected interface.
Received Pause Frames Displays the number of received
paused frames on the selected interface.
Transmitted Pause Frames Displays the number of
paused frames transmitted from the selected interface.
Clear Counters Click the Clear Counters button to reset
all the counters on this screen to zero.
•
•
•