Filter
Top Products
Chapter 4
Configuration Using the Web-based Utility
30
Business Series Smart Gigabit Ethernet Switch
Bridge Multicast Address Identifies the Multicast group
MAC address/IP address.
Bridge IP Multicast Displays the port that can be added
to a Multicast service.
Interface, Gigabit, LAG Lists switch interfaces and LAGs
that can be added to a Multicast service. The configuration
options are as follows:
Static Indicates the port is user-defined.
Dynamic Indicates the port is configured
dynamically.
Forbidden Forbidden ports are not included the
Multicast group, even if IGMP snooping designated
the port to join a Multicast group.
None The port is not configured for Multicast service.
Click Add to List to add the configured static multicast
address to the table at the bottom of the screen.
Click Show All to display all multicast addresses on all
VLANs in the table at the bottom of the screen.
Click Save Settings to save the changes, or Cancel
Changes to cancel the changes.
Multicast > Bridge Multicast Forward All
The Bridge Multicast Forward All screen contains fields for
attaching ports or LAGs to a device that is attached to a
neighboring Multicast router or switch.
Multicast > Bridge Multicast Forward All
Once IGMP Snooping is enabled, Multicast packets are
forwarded to the appropriate port or VLAN.
The Bridge Multicast Forward All screen contains the
following fields:
VLAN ID Displays the VLAN for which Multicast
parameters are displayed.
•
•
•
•
Interface Interfaces with the following configuration
options:
Static The port is user-defined.
Dynamic The port is configured dynamically.
None The port is not configured for Multicast service.
Gigabit Gigabit ports with the following configuration
options:
Static The Gigabit port is user-defined.
Dynamic The Gigabit port is configured dynamically.
None The Gigabit port is not configured for Multicast
service.
LAG LAGs with the following configuration options:
Static The LAG is user-defined.
Dynamic The LAG is configured dynamically.
None The LAG is not configured for Multicast service.
Click Save Settings to save the changes, or Cancel
Changes to cancel the changes.
•
•
•
•
•
•
•
•
•