Filter
Top Products
6
Chapter 2: Getting to Know the Wireless-G ADSL Gateway with 2 Phone Ports
The Back Panel
Wireless-G ADSL Gateway with 2 Phone Ports
Chapter 2: Getting to Know the
Wireless-G ADSL Gateway with 2 Phone Ports
The Back Panel
The Gateway’s ports, where a network cable is connected, are located on the back panel. The Gateway’s Reset
button is also located on the back panel.
LINE The LINE port connects to the ADSL line.
Phone (1 and 2) The Phone ports connect to phones you wish to connect to your network.
Ethernet (1-4) The Ethernet ports connect to your computer and other network devices.
Reset Button There are two ways to Reset the Gateway's factory defaults. Either press the Reset Button, for
approximately ten seconds, or restore the defaults from the Factory Defaults screen of the
Administration tab in the Gateway’s Web-Based Utility.
Power The Power port is where you will connect the power adapter.
Important: Resetting the Gateway to factory defaults
will erase all of your settings (WEP Encryption, Wireless
and Wired network settings, etc.) and replace them
with the factory defaults. Do not reset the Gateway if
you want to retain these settings.
Figure 2-1: Back Panel