Filter
Top Products
39
Chapter 4: Configuring the Gateway
The Access Restrictions Tab
Wireless-G ADSL Gateway with 2 Phone Ports
Internet Access
The Internet Access tab allows you to block or allow specific kinds of Internet usage. You can set up Internet
access policies for specific computers and set up filters by using network port numbers.
Internet Access Policy. Multiple Filters can be saved as Internet Access Policies. When you wish to edit one,
select the number of the Policy from the drop-down menu. The tab will change to reflect the settings of this
Policy. If you wish to delete this Policy, click the Delete button. To see a summary of all Policies, click the
Summary button.
The summaries are listed on this screen with their name and settings. To return to the Internet Access tab, click
the Close button.
Enter Policy Name. Policies are created from the fields presented here.
To create an Internet Access policy:
1. Enable the policy by selecting Enable next to Status.
2. Enter a Policy Name in the field provided. Select Internet Access as the Policy Type.
3. Click the Edit List of PCs button. This will open the List of PCs screen. From this screen, you can enter the IP
address or MAC address of any computer to which this policy will apply. You can even enter ranges of
computers by IP address. Click the Save Settings button to save your settings, the Cancel Changes button
to undo any changes and return to the Internet Access tab.
Figure 4-31: Access Restrictions Tab - Internet Access
Figure 4-32: Internet Policy Summary