Filter
Top Products
47
Chapter 4: Configuring the Gateway
The Administration Tab
Wireless-G ADSL Gateway with 2 Phone Ports
IGMP-Proxy
If your multimedia application or device is not working properly behind the Gateway, then you can enable
IGMPProxy to allow multicast traffic through the Gateway.
PVC Available. The Gateway uses one Permanent Virtual Circuit (PVC) connection, so select the number 1 from
the drop-down menu.
IGMP Proxy. To use this feature, select Enable. Otherwise, select Disable.
TR-069
TR-069 is a protocol for communication between a Customer Premise Equipment (CPE) and Auto-Configuration
Server (ACS) that encompasses secure auto-configuration as well as other CPE management functions within a
common framework. The Gateway is the CPE, which uses this protocol.
TR-069. To enable this feature, select Enable.
ACS URL. Enter the URL of the ACS. Your ISP will provide you with the ACS URL.
ACS Username. Enter the username to connect to the ACS. Your ISP will provide you with your ACS Username.
ACS Password. Enter the password to connect to the ACS. Your ISP will provide you with your ACS Password.
WLAN
Management via WLAN. Enabling this feature allows the Gateway to be managed by a wireless computer on the
local network when it logs into the Gateway's Web-based Utility.
TELNET
Enabling this feature allows the user to use Telnet and CLI (Command Line Interface) to control the functionality of
the Gateway.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.