Marantz VP8600 Projector User Manual


 
7
ENGLISH
CONNECTION
S-VIDEO OUT
VIDEO OUT
VCR
S-video cable (commercially available)
Video cable
(commercially available)
When making connections be sure to:
Turn off all equipment before making any connections.
Use the proper cables for each connection.
Securely insert the plug into the port to connect cables. Loose cables can lead to trouble
and damage.
When pulling out a cable:
Be sure to grab the plug, not the cable itself.
Connect the supplied AC power cord into the AC IN socket of the projector.
Note:
Make sure the AC power cord is firmly connected into the AC IN socket.
Connection with AC Power Supply
You can connect this projector to a VCR, DVD player and other video equipment.
Connecting a video source using S-VIDEO IN and VIDEO IN terminals.
1.
Connect one of the S-video cable to the S-VIDEO IN terminal, or one end of the video
cable to the VIDEO IN terminal on the projector.
2. Connect the other end of the S-video cable or the video cable to the S-video output
terminal or video output terminal of the video source.
Connection with Video Equipments
Connecting a DVD player to the COMPONENT VIDEO IN 1 or 2 terminal
(Devices can be connected to both terminals at the same time.)
1.
Connect the individual terminals of the component video cable into the COMPONENT
VIDEO IN 1 or 2 terminal of the projector.
2. Connect the other end of the cable to the corresponding terminals on a DVD player.
COMPONENT 1: YPbPr
FL OFF
STANDBY
FL OFF
STANDBY
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Component cable
(commercially available)
DVD Player
DVD Player
Component cable
(commercially available)