Filter
Top Products
20
ENGLISH
ITEM
PIP input
PIP Horizontal Shift
PIP Vertical Shift
PIP Window Size
DESCRIPTION
Press
12
to select the PIP input.
Press
12
to adjust the horizontal position of the PIP window.
(Range:
–128 to 127
)
Press 12to adjust the vertical position of the PIP window.
(Range:
–128 to 127
)
Press 12to adjust the size of the PIP window.
(Range:
–128 to 127
)
DEFAULT
*1
–128
–128
*1
Press Info. to open Information menu. The Information menu items are displayed only.
Information Menu
ITEM
Input
Resolution
Lamp Hour
DESCRIPTION
Displays the select input source.
Displays the resolution and H/V in PC mode.
Displays the color standard of the connected video device.
Number of hours lamp has been in use.
DEFAULT
These
items are
display
only.
Press MENU to open the OSD menu. Press 34 to move to the Config. menu and press
ENTER. Press
34 to move up and down in the Config. menu. Press 12to adjust values and
press ENTER to confirm the setting.
Config. Menu (PC/HD and Video)
ITEM
H Keystone
V Keystone
Menu Position
Menu Timer
Language
Installation
Auto Input
Detection
Auto Power Off
Reset
DESCRIPTION
Press
12to adjust the horizontal keystone.
(Range: –36 to 36)
Press
12to adjust the vertical keystone.
(Range: –36 to 36)
Press
12to select the menu screen position.
(Range: 1 (upper left) — 9 (bottom right)
Press
12to select how long the menu is displayed.
(Range: Continue (OSD appears until manually closed)
— 10 Sec. — 20 Sec.)
Press
12to change the language.
(Range: English; Français; Italiano; Deutsch; Español)
Press
12to choose from four projection methods:
Front Desktop mount, front of screen
F+Ceiling Ceiling mount, front of screen
Rear Desktop mount, rear of screen
R+Ceiling Ceiling mount, rear of screen
Press
12to enable/disable Auto Input Detection.
Note: When this setting is disabled, you need to select
the source manually.
When the Auto Power off is set to Enable, power to the
projector automatically shuts off if no signals are received
and no operations are performed for about 10 consecutive
minutes.
Resets all items in the config. menu to the default values.
DEFAULT
0
0
4
Continue
English
Front
Disable
Disable
—
Press P-MENU in PIP mode to open PIP Configuration menu. Press 34 to move up and
down in the PIP Configuration menu.
PIP Configuration Menu
YP
bPr
X
X
X
X
X
X
O
O
SCART
X
X
X
X
X
X
O
O
RGB
X
X
X
O
O
O
X
X
COMP.2
X
X
O
X
X
X
O
O
S-VIDEO
X
X
O
X
X
X
O
O
VIDEO
X
X
O
X
X
X
O
O
RGB
O
O
X
O
O
O
X
X
DVI
O
O
O
O
O
O
X
X
Main Input Source
PIP Source
COMP.1
COMP.1
YP
bPr
SCART
RGB
COMP.2
S-VIDEO
VIDEO
RGB
DVI
Information:
PIP operations may not function depending on the combination of input signals.
See the table below for details.
O: support X: Not support
*1 The default value depends on input signal.