Filter
Top Products
16
ENGLISH
The projector has an On-Screen Display (OSD) that lets you make picture adjustment and
change various settings.
❖ Navigating the OSD
Press MENU to open the OSD, and then use the arrow buttons (up/down 34, left/right 12) to
navigate and make changes. Press ENTER to enter menus and confirm settings. Press the
EXIT button to exit menus. Press MENU to close the OSD.
The example below demonstrates how to change the Brightness setting in the Picture
Adjust menu, and then navigate to the Horizontal Size setting in the Display menu.
1. Press MENU. The Picture Adjust menu (or last open menu) appears.
2. Press ENTER to select Brightness.
3. Press 12to adjust the brightness.
4. Press EXIT to leave the Picture Adjust menu.
5. Press 34 until Display is highlighted and
press ENTER. The Display menu opens;
the Horizontal Size setting is selected.
6. Press 12to adjust the horizontal setting.
7. Press MENU to close the OSD.
On-Screen Display Menu Controls
INPUT
V-MUTE MENU
FREEZE
PIP
EXIT
E
M
F
1, 7
4
2, 5
3, 6
OPERATIONS
❖ Setting the OSD Language
You may want to reference the OSD on your projector while reading this section. Set the OSD
language to your preference before continuing. (Available languages are English, Francais,
Italiano, Deutsch, and Español. The default language is English.)
1. Press MENU. The Picture Adjust menu (or the last open menu) appears.
2. Press 34 until Config. is highlighted and then press ENTER.
3. Press 34 until Language is highlighted.
4. Press 12to select the language you want.
5. Press ENTER to confirm.