Filter
Top Products
.:
Planning the site
41
Note:
Sample floor plans may
.vary
from your own depending on your
system needs and the size/arrangement of your equipment room.
Follow
the engineering guidelines as specified in
System engineering
(553-3001-151).
Secondary storage
Provide space for the storage of disks, printer paper, printouts, and daily
reports within the equipment area. A secure storage room for spare parts is
recommended.
Similar environmental conditions should be maintained for storage and
operation areas. If it is not possible to maintain the storage area
environment exactly the same as that of the operating equipment, adequate
time must be allowed for stored materials to adjust to the equipment room
environment before they are used.
Maintenance/Technician area
. .
The maintenance/technician area is used primarily to store tools, test
equipment, manuals, spare parts, and as an online work center. The area
should have good lighting and convenient access to the equipment. Typical
items that would go into a maintenance/technician area are:
-
shelf for instruction books
-
spare parts storage room
-
paper storage area
-
locking cabinet or storage area for back up disks
-
table or desk
-
printer/VDT or equivalent device
Equipment room accessories
The following equipment room accessories are recommended:
!
‘_3
.:.:,
!
“‘_L’
-
Temperature/humidity recorder(s)
-
A key or combination with option
key&k
for the switchroom door
(electric locks, such as push button access code or card reader, are not
recommended unless battery backup or key override is provided)>
-
Desk or table, file cabinet, and storage shelves
Installation planning 553-3001-120