10 Universal Equipment Modules and packaging
-
PFu/DTl
The NT8D35 NET Module is powered by a Common Equipment Power
S”PPlY.
Quantity-A
maximum of 10 per system (five network groups)
NT8D36AA Inter Group Module
System hardware--System
option 71
Purpose-The
NT8D36AA Inter Group Module provides a path for the
switching of traffic between the network groups in the system. Faceplate
cables from the Clock Controller (CC) and Intergroup Switch (IGS) circuit
cards are connected to the Inter Group Module. This module uses a
QFC417 Junctor Board.
This module is used in both AC and DC systems.
Quantity--One per
system
NT8D37AA, NT8D37DC Intelligent PE Module
System hardware-System option 21/51/61171
Purpose-The
NT8D37 Intelligent Peripheral Equipment Module
(hereafter referred to as NT8D37 IFE) supports a Controller card and 16
IFE cards. The Controller card is situated near the center of the module,
between slot 7 and slot 8.
This module is available in two versions:
-
NT8D37AA for AC systems
-
NT8D37DC for DC systems
The card slots in the NT8D37 IPE card cage support the following:
-
Universal Trunk
-
E&MTrunk
-
Digitone
Receiver
-
Analog Line card (ALC)
..
.
‘:I-.
:
,.!I
.
Equipment identification and ordering information 553-3001-154