Filter
Top Products
Station equipment 65
-
no supplementary power is required
::
QSR2 venture 1 headset
.>;
.::
‘L..
.
..~
_.,
4
_
_
_
.
.-.,
._.
.._
:I:--”
This set is used in conjunction with the
QKNl
headset kit to provide head
._
. .
telephone set operation. Refer to
QSU-Telephone Sets, Add-On Modules,
interface kits and Meridian Ml 000 Series Telephones description
(553-2001-110) for more information.
This headset provides the following features:
-
lightweight (17 g)
-
ear-mounted
-
left or right
-
six different sizes of eartips
-
acoustic, noise-canceling transmitter held close to user’s mouth by a
thin, plastic covered, stainless steel arm attached to the headset capsule
I.
QSAM2A and QSAM3A group listening switch kit
This kit allows the speech of both parties to be heard through the speaker of
the SL-1 set. Refer to
QSU-Telephone Sets, Add-On Modules, interface kits
and Meridian Ml000 Series Telephones description
(553-2001-l 10) for
more information.
.-
An ON/OFF switch is mounted in the left-hand filler plate of a QSU-type
set. When ON, the speech of the SL-1 set user and the connected party are
heard through the speaker of the SL-1 set. When OFF, the SL-1 set
functions normally.
-
QSAM2A
used on phase I SL-1 sets
-
QSAM3A
used on phase II SL-1 sets,
(QSUlF
and later vintage)
Asynchronous data options
These microprocessor-controlled devices provide the interface (RS-232
compatible) through which ASCII Data Terminal Equipment (DTE) may be
connected to the Meridian 1 network. Two types of asynchronous data
---- --
:.:.
-;
._
options are available for use with the following digital telephones:
-
NTlFOBAA printed circuit board for use with M2009, M2018 and
M2112 digital telephones. Refer to
Meridian M2000 Digital
Equipment identification and ordering information 553-3001-154