Copier/Document Server Features
118
4
❖ Special Original Display Defaults
You can set up to three items for displaying on the initial display from five
items below.
•Mixed Sizes
•Batch
•SADF
• Thin Paper
•Original Size
❖ Tone: Original Remains
You can set whether to use a buzzer to alert you when you forget to remove
an original.
• On
•Off
If the “Panel key sound” during system settings is set to “Off”, this function
is invalidated even if it is set to “On”.
❖ Job End Call
You can set whether to generate a buzzer sound (“pi”) when a copy is com-
pleted.
If “Panel key sound” when performing system settings is set to “On”, the
buzzer sounds four times if copying is interrupted because the paper has run
out or become jammed. This notifies you that the copy job could not be com-
pleted.
• On
•Off
❖ Connect Copy Key Display
You can set whether to display the [Connect Copy]. If you select "Off", the key
does not appear and a master unit cannot be obtained.
• On
•Off
❖ Switch Original Counter Display
You can set whether to count the two-sided documents by number of sheets
or pages.
• Original Sheet Counter
• Original Page Counter