Filter
Top Products
Administrator Tools
75
2
❖ Program / Change / Delete LDAP Server
Program the LDAP server to find up e-mail destinations in the LDAP server
Address Book directly. This function is possible when sending scan files by e-
mail using the scanner.
•Name
•Server Name
•Search Base
•Port Number
• Use Secure Connection (SSL)
• Authentication
• Search Conditions
•Search Options
To start an LDAP search, make sure that the items listed below are set. For
other items, check your environment and make any necessary changes.
•Server Name
•Search Base
•Port Number
• Search Conditions
• Authentication method selection
To use the LDAP server in Administrator Tools, select [On] under LDAP server.
This function supports LDAP Version 2.0 and 3.0. Ver 2.0 does not support
High Security authentication.
•Program/Change
A Press [System Settings].
B Press [Administrator Tools], and then press [TNext] twice.
C Press [Program/Change/Delete LDAP Server].
D Select the LDAP server you want to program or change.
When programming the server, select [Not Programmed].
E Set each item as necessary.
F Press [OK] after setting each item.
G Press [Exit] twice.
H Press the {User Tools} key.