Filter
Top Products
Network Settings
19
1
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒ When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for sending e-mail with IEEE 1394 in-
terface cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
Heading Setting Item Setting Requirements
interface settings/IEEE 1394 IPv4 Address Mandatory
interface settings/IEEE 1394 DDNS Configuration As required
interface settings/IEEE 1394 Host Name As required
interface settings/IEEE 1394 Domain Name As required
interface settings/IEEE 1394 WINS Configuration As required
interface settings/IEEE 1394 IPv4 over 1394 Mandatory
interface settings/Network IPv4 Gateway Address Mandatory
interface settings/Network DNS Configuration As required
interface settings/Network Effective Protocol Mandatory
File Transfer SMTP Server Mandatory
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3/IMAP4 Settings As required
File Transfer Administrator's E-mail Address As required
File Transfer E-mail Communication Port As required
Heading Setting Item Setting Requirements