Microsoft PRO 1356EX Printer User Manual


 
Stamp
141
4
•Stamp Position
You can adjust the print position of the Stamp Text within the available
range as shown below.
Metric version:
"Top Left"…T/B: 4-144mm, L/R: 4-144mm
"Top Center"…T/B: 4-144mm, L/R: 72-72mm
"Top Right"…T/B: 4-144mm, L/R: 4-144mm
"Center Left"…T/B: 72-72mm, L/R: 4-144mm
"Center"…T/B: 72-72mm, L/R: 72-72mm
"Center Right"…T/B: 72-72mm, L/R: 4-144mm
"Bottom Left"…T/B: 4-144mm, L/R: 4-144mm
"Bottom Center"…T/B: 4-144mm, L/R: 72-72mm
"Bottom Right"…T/B: 4-144mm, L/R: 4-144mm
Inch version:
"Top Left"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
"Top Center"…T/B: 0.1-5.7”, L/R: 2.8-2.8”
"Top Right"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
"Center Left"…T/B: 2.8-2.8”, L/R: 0.1-5.7”
"Center"…T/B: 2.8-2.8”, L/R: 2.8-2.8”
"Center Right"…T/B: 2.8-2.8”, L/R: 0.1-5.7”
"Bottom Left"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
"Bottom Center"…T/B: 0.1-5.7”, L/R: 2.8-2.8”
"Bottom Right"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
Page to Stamp
You can specify whether to print the stamp on all pages or only the first
page.
All Pages
•1st Page Only
Dup. Back Pg. Stamp Pos.
You can adjust the stamp position for back side in duplex mode, within the
available range as shown below.
Metric version:
Left-Right: Left 432 mm – Right 432 mm
Top-Bottom: Top 432 mm – Bottom 432 mm
Inch version:
Left-Right: Left 17.0” – Right 17.0”
Top-Bottom: Top 17.0” – Bottom 17.0”
Note
For the procedure of entering the [Copier/Document Server Features], see p.3
“Accessing User Tools (System Settings)”