Filter
Top Products
System Settings
62
2
File Transfer
This section describes various items of [File Transfer] under [System Settings].
❖ Delivery Option
Enables or disables sending stored or scanned documents to ScanRouter V2
delivery server.
•On
• Main Delivery Server IPv4 Address: 000.000.000.000
• Sub Delivery Server IPv4 Address: 000.000.000.000
• Off
Set this option when specifying whether or not to use ScanRouter V2. If you
do, you will have to re-register I/O devices in ScanRouter V2.
❖ Capture Server IP Address
Specify the capture server IP address.
This setting appears when the media link board is installed, and that the cap-
ture function is being used by the ScanRouter V2.
❖ SMTP Server
If DNS is in use, enter the host name.
If DNS is not in use, enter the SMTP server IP address.
•Server Name
•Port No.
Enter the [Server Name] using up to 127 alphanumeric characters. Spaces can-
not be used.
Enter [Port No.] between 1 and 65535 using the number keys, and then press
the {#} key.
The Port No. is set to 25 by default.