Filter
Top Products
SMART IP EXTENDER
11
11. Connecting the Power management options
Figure 7 gives an overview of the three Power management options.
Server
KVMIPMI
IPMI version
1.5interface
MINICOM
Activity
SMART IP
Extender
SystemOK
Server
KVMIPMI
External power
Switch box
MINICOM
Activity
SMART IP
Extender
System OK
Figure 7 Power management options
12. Connecting the IPMI option
IPMI Version 1.5 defines a serial connection to access certain system parameters
and to perform actions like switching off the system or performing a hard reset.
Connect a Serial cable to a Serial port on the host computer and the Serial 1 or 2 port
on the IP Extender.
For further information about IMPI 1.5, see
http://developer.intel.com/design/servers/ipmi/tools.htm
To use the IPMI over a serial interface enable it in the host computer. This is done
using BIOS settings or special utilities provided by the server manufacturer. Refer to
the server manufacturer's manual site.
Note! IPMI V1.5 is only supported by server systems manufactured in 2002
onwards.