Filter
Top Products
USER GUIDE
32
Show in console – check this option to have a button appear on the top of the
Remote console. Click the button to switch to that computer.
44. Video Settings
From the IP Extender Menu choose Video Settings. The Video settings appear. See
Figure 21
Figure 21 Video Settings
45. Enable local video port
This option decides if the video output on the front panel of IP Extender is active
and passing through the incoming signal from the host system.
46. Noise filter
Define how IP Extender reacts to small changes in the video input signal. A large
tolerance needs less network traffic and leads to a faster video display, but small
changes in some display regions may not be recognized immediately. A small
tolerance displays all changes instantly but may lead to a constant amount of
network traffic even if display content is not really changing (depending on the
quality of the video input signal). The default setting should be suitable for most
situations.
47. Video quality/speed
Choose the Video quality/speed, the faster the speed the lower the video quality.
48. Custom Video Modes
Add video modes to IP Extender, which are not recognized using the factory
settings, when for example using special modelines in an X-Window configuration
on the host or with uncommon hosts or operating systems.