Filter
Top Products
9
Getting Started
3. Names of Parts
This drive unit consists of the following parts:
FRONT PANEL
(1) Power Switch
By sliding the switch back and forth from left to right, power is
turned "on" and "off".
(2) Power Indicator Lamp
When power is on, light is green.
(3) Access Indicator Lamp
Indicates the access status of the PC card reader.
When in a read/write state, the lamp is green (even if a PC card
is not inserted in the slot, the lamp will blink occasionally) .
(4) Lock Indicator Lamp
The lock light is lit when software or data on the PC card is be-
ing accessed or is active. PC cards should not be removed
when this lamp is on.
(5) Eject Button
Pushing this button ejects the PC card.
(6) Card Slot
Type I, II, and III PC cards may be inserted.
1
2
3
6
5
4