Filter
Top Products
24
8. Troubleshooting
Corrective Measure
Insert the power plug securely into the
outlet or computer.
Use a standard SCSI cable.
Use a standard SCSI cable (6m or
shorter).
Change the cable connections.
Activate terminator.
Turn off the power to the SCSI device
then change the SCSI ID.
Turn off the power to the SCSI device
then change its SCSI ID
Change the cable connections.
Activate terminator.
Install Mac-PC Manager Lite in the
system folder.
Disable or delete the suspect extended
functions, or change their names and
the startup activation order.
Insert the card properly.
Symptom
The power will not
turn on.
The Macintosh com-
puter hangs up at
startup.
The PC card cannot
be mounted (no icon
is displayed).
Cause
The power is not connected to an outlet or
computer.
Nonstandard SCSI cable is used.
The SCSI cable is too long.
The CD-10 drive and other SCSI devices
are not properly connected.
The terminator is not activated.
The same SCSI ID is assigned to more than
one SCSI device.
The CD-10 drive has the same SCSI ID as
another SCSI device.
The SCSI cables are not properly
connected.
The terminator is not activated.
Mac-PC Manager Lite is not installed.
Mac-PC Manager Lite is in contention with
other control panels or extended functions.
The card is not properly inserted.
Macintosh Systems