Filter
Top Products
Printer Panel 1
– 11 –
4581-7777-01
7.3 Setting Up the Selector
NOTE
Prepare aluminum tape before beginning the setup.
7.4 Connecting the Equipment Cables
1. Remove the selector from its box.
C4004U601AA
2. Remove the two screws from the selector,
and then remove the upper cover.
C4004U602AA
Aluminum tape
3. Affix aluminum tape to the converter as
shown in the illustration.
C4004U603AA
1. Using a DTP32 cross-cable, connect the I/O
port of the X-Rite to port B of the selector.
C4004U559AA
2. Using the RS232 straight cable (2), connect
the COM 1 port of the computer to port C on
the selector.
NOTE
When connecting to the COM2 port, set the
External Panel Controller port setting to
COM2.
C4581U022AA
3. Selector and printer connection:
Using a cross-cable, connect port A of the
selector to the printer.
C4581U027AA