Printer Panel 1
– 6 –
4581-7777-01
9. Keeping the Imaging Unit in the level posi-
tion, insert the Imaging Unit into the mount-
ing position on the printer until its leading
edge is stopped.
Make sure that the interference preventive
sheet is left attached to the Imaging Unit
when the Imaging Unit is inserted into the
printer.
NOTE
Make sure the protective sheet is rolled up into
the Imaging Unit, then insert Imaging Unit into
the Printer.
4025U027AA
10. Check that the Imaging Unit is inserted posi-
tively in position.
NOTE
The positioning rib at the leading edge of the
Imaging Unit cover should be fitted positively
in the hole in the mounting position on the
printer.
4025U028AC
11.Supporting the underside of the Imaging
Unit with your left hand, hold the portion of
the unit shown in the illustration with your
right hand and gently push it into position
until a click is heard.
4025U029AB
12. Pull out the empty Imaging Unit cover.
4025U030AB
13. Push the Imaging Unit release lever of Yel-
low all the way until a click is heard.
14. Using the same procedure, install all Imag-
ing Units.
4025U031AA
