Filter
Top Products
Printer Panel 1
– 18 –
4581-7777-01
8.2 Specifying the Serial Number
NOTE
Be sure to specify the serial number.
When the serial number is specified, the settings for each unit can be read by the
printer. If the serial number is not specified, a correctly adjusted image cannot be
printed.
1. Check that the External Panel Controller appears in the computer screen, and then
display the Tech. Rep. Mode screen. (For details about displaying the Tech. Rep.
Mode screen, refer to the Service Manual.)
4. Make sure that [Printer] is selected. Using the keypad in the External Panel Controller,
enter the printer’s serial number.
Repeat this step to enter the serial numbers for [LCC], [Sorter/FN], and [Duplex].
5. Click [END].
6. Click [Fin. Time].
7. Check that the Basic screen appears on the External Panel Controller.
C4581P003CA
2. Click [System Input].
C4581P004CA
3. Click [Serial # Input].
C4581P008CA
C4581P009CA