Filter
Top Products
Printer Panel 1
– 43 –
4581-7777-01
17. Installing the Patch Files
■
■■
■
Objective
The controller is recognized as Minolta printer in a network management tool
(EX. PageScope Net Care) at the time of use. In addition, the Minolta logo appears at the
top of the PageScope Light page.
NOTE
This patch file is not provided on the CD-ROM supplied with the controller; it must be
acquired separately.
■
■■
■
Patch file installation procedure
1. Check that the computer can communicate with the controller through TCP/IP.
2. Install the Command Work Station Utility from the CD-ROM included with the control-
ler on the computer.
NOTE
This software can only be used with the Windows operating system.
3. Start up the Command Work Station.
4. Select the controller from Available Servers, and then click [Add].
5. Login with administrator authorization.
6. Select the Job from Import in the File Menu.
7. In the Select File to Import dialog, select the patch file, select [31 C-M] in the Logical
Printer, and then click [Import].
8. In order to apply the patch file settings, the controller must be rebooted.
After waiting 60 seconds or more, restart the controller.
9. When PageScope Light is accessed, check that the Minolta logo appears on the page,
as shown below.
The PageScope Light page appears as shown below before the patch file is installed.
To access PageScope Light:
Enter the IP address of your controller into the Address box of the Web browser.
(Example) http://IP address of the controller/
After installing the patch file
C4581P018CA
C4581P101CA
Before installing the patch file