Filter
Top Products
Printer Panel 1
– 49 –
4581-7777-01
■
■■
■ Network Printing on a Macintosh Computer
AppleTalk printing
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
Settings for a Macintosh computer
1. Double-click the AdobePS Installer icon.
2. After installation is finished, restart the computer.
3. Select Chooser from the Apple menu.
4. Click the AdobePS icon. (Make sure that AppleTalk is set to [Active].)
5. If zones are listed, select the correct AppleTalk zone.
6. From the Select a PostScript Printer list, select the type of connection used by the
controller, and then click [Create].
7. Select the PPD file for the model of the printer that was installed, and then click [OK].
8. Close the Chooser.
■
■■
■ NetWare environment
Settings for NetWare printing
The controller supports the following NetWare environments.
Controller settings
(Select the necessary settings according to the user’s environment.)
PC Settings
1. Start up the Add Printer Wizard, and then select [Network Printer].
2. Display the printer on the network (click [Browse] for Windows 98 and Me, or click
[Next] for Windows 2000 and XP), and then select the queue name (name of NDPS
Printer Agent for NDPS) for the printer registered with the server.
3. In the dialog where the manufacturer and model of the printer can be selected, click
[Have Disk].
4. Click [Browse], select the corresponding folder on the CD-ROM, and then click [OK].
5. Select the model of the printer from the printer list, and then click [Next].
6. Follow the instructions of the Add Printer Wizard to finish installing the driver.
Network Setup Protocol Setup >
AppleTalk Setup
Enable AppleTalk Yes
/No [Yes]
AppleTalk Zone Select the zone
from the list.
NetWare Version Service Settings That Must Be Specified
From the Controller Operation
Screen
Netware 4.X PServer NDS, Pserver name, NDS context/
Tr e e
Netware 5.X PServer/NDPSPrinter NDS, Pserver name, NDS context/
Tree (Only LPR printing with TCP/IP
is supported in NDPS.
Specify the TCP/IP settings.)
Network
Setup
Protocol Setup > IPX/SPX Setup IPX Auto Frame
Ty pe
Ye s
Frame Setup Ethernet 802.2
Ethernet 802.3
Ethernet II
Ethernet SNAP
Service Setup >
PServer Setup
Enable Pserver No
NDS Setup Enable NDS No
Select NDS
Navigate to the
Print Server
Select the tree.
Select the printer
server.
Bindery Setup Add File Server,
Navigate to the
Print Server
Select the tree.
Select the printer
server.
NetWare Server Poll Interval (sec) 1-3600 [15]